linux-4.9.git
2017-07-23 Julian Wiedmanns390/qeth: avoid null pointer dereference on OSN
2017-07-23 Julian Wiedmanns390/qeth: unbreak OSM and OSN support
2017-07-23 Ursula Brauns390/qeth: handle sysfs error during initialization
2017-07-23 Gao Fengdriver: vrf: Fix one possible use-after-free issue
2017-07-23 Phil Elwelloverlays: Fix i2c-rtc order and fragment numbering
2017-07-23 Andrei Gherzandma-bcm2708: Fix module compilation of CONFIG_DMA_BCM2708
2017-07-23 Phil ElwellBCM270X_DT: Add midi-uart1 overlay
2017-07-23 Tejun Heocgroup_get() expected to be called only on live cgroups...
2017-07-23 sandeepalAllo Digione Driver (#2048)
2017-07-23 P33Mdwc_otg: fiq_fsm: Make isochronous compatibility checks...
2017-07-23 Stefan TatschnerAdd device tree config for htu21
2017-07-23 Phil ElwellBCM270X_DT: Improve i2c-sensor and i2c-rtc overlay
2017-07-23 Phil Elwellconfig: Adding SENSOR_JC42
2017-07-23 P33Mdwc_otg: make periodic scheduling behave properly for...
2017-07-23 popcornmixhid: Reduce default mouse polling interval to 60Hz
2017-07-23 Tobias JakobiHID: usbhid: extend polling interval configuration...
2017-07-23 popcornmixRevert "hid: Reduce default mouse polling interval...
2017-07-23 Phil Elwellclk: bcm2835: Minimise clock jitter for PCM clock
2017-07-23 Anton Onishchenkompu6050 device tree overlay (#2031)
2017-07-23 popcornmixconfig: Add CONFIG_IPV6_SIT_6RD
2017-07-23 popcornmixconfig: Add CONFIG_IPV6_ROUTE_INFO
2017-07-23 Liviu DudauASoC: TLV320AIC23: Unquote NULL from control name
2017-07-23 Phil Elwelloverlays: README: remove vestigial SDIO parameters
2017-07-23 Karl Palssonusb/serial/ch341: Add parity support
2017-07-23 popcornmixconfig: Add FB_TFT_ST7789V module
2017-07-23 Phil Elwellserial: 8250: Add CAP_MINI, set for bcm2835aux
2017-07-23 Ed Blakeserial: 8250: Add IrDA to UART capabilities
2017-07-23 chenzhiwoAdd device tree overlay for GPIO connected rotary encoder.
2017-07-23 popcornmixconfig: Add CONFIG_I2C_ROBOTFUZZ_OSIF
2017-07-23 popcornmixconfig: Add CONFIG_TOUCHSCREEN_EDT_FT5X06
2017-07-23 popcornmixconfig: Drop CONFIG_TOUCHSCREEN_EKTF2127
2017-07-23 Ahmet Inanoverlays: Add Goodix overlay
2017-07-23 Ahmet Inanconfig: Add Goodix touch controller module
2017-07-23 Eric AnholtBCM270X: Drop position requirement for CMA in VC4 overlay.
2017-07-23 Eric Anholtdrm/vc4: Mark the device as active when enabling runtim...
2017-07-23 P33Mdwc_otg: remove unnecessary dma-mode channel halts...
2017-07-23 P33Mdwc_otg: delete hcd->channel_lock
2017-07-23 P33Mdwc_otg: fix several potential crash sources
2017-07-23 Phil ElwellSQUASH: BCM270X_DT: Fix typo in mmc overlay
2017-07-23 Phil ElwellBCM270X_DT: Tidy up mmc, sdhost, sdio overlays
2017-07-23 popcornmixdwcotg: Allow to build without FIQ on ARM64
2017-07-23 Nisar SayedAccording to RFC 2460, IPv6 UDP calculated checksum...
2017-07-23 Phil Elwellirq_bcm2836: Send event when onlining sleeping cores
2017-07-23 Phil ElwellARM: dts: bcm283x: Reserve first page for firmware
2017-07-23 popcornmixRevert "serial: 8250: Don't crash when nr_uarts is 0"
2017-07-23 popcornmixbcm2708_fb: Avoid firmware mbox call in vc_mem_copy
2017-07-23 popcornmixvcsm: Treat EBUSY as success rather than SIGBUS
2017-07-23 P33Mfiq_fsm: Use correct states when starting isoc OUT...
2017-07-23 P33Mdwc_otg: fix split transaction data toggle handling...
2017-07-23 popcornmixvc4_fkms: Apply firmware overscan offset to hardware...
2017-07-23 P33Mdwc_otg: make nak_holdoff work as intended with empty...
2017-07-23 Phil Elwellclk: bcm2835: Limit PCM clock to OSC and PLLD_PER
2017-07-23 popcornmixdwc_otg: Add the dependency on FIQ
2017-07-23 Scott EllisBCM270X_DT: Add tmp102 to i2c sensor overlay
2017-07-23 Scott Ellisconfig: Enable TI TMP102 temp sensor module
2017-07-23 Phil Elwellconfig: Add CONFIG_BMP280 (and CONFIG_BMP280_I2C)
2017-07-23 Phil ElwellBCM270X_DT: Add bme280 and bmp180 to i2c-sensor overlay
2017-07-23 James Hughessmsc95xx: Use skb_cow_head to deal with cloned skbs
2017-07-23 Eric Dumazetsmsc75xx: use skb_cow_head() to deal with cloned skbs
2017-07-23 Eric Anholtpanel-raspberrypi-touchscreen: Fix NULL deref if probe...
2017-07-23 Boris BrezillonARM: dts: bcm283x: Add HDMI audio related properties
2017-07-23 Eric Anholtdrm/vc4: Add HDMI audio support
2017-07-23 Eric AnholtRevert "drm/vc4: Verify at boot that CMA doesn't cross...
2017-07-23 Eric Anholtdrm/vc4: Allow using more than 256MB of CMA memory.
2017-07-23 Yasunari TakiguchiBCM2708: Add Raspberry Pi TV HAT Device Tree Support
2017-07-23 Yasunari TakiguchiThis is the driver for Sony CXD2880 DVB-T2/T tuner...
2017-07-23 Matt FlaxAudioinjector octo : Make the playback and capture...
2017-07-23 Matt FlaxAudioinjector : make the octo and pi sound cards have...
2017-07-23 BabuSubashChandarAdd clock changes and mute gpios (#1938)
2017-07-23 BabuSubashChandar CAdd support for new clock rate and mute gpios.
2017-07-23 Matt FlaxAudioinjector Octo : add extra sample rates, fix rst...
2017-07-23 Phil Elwellleds-gpio: Remove stray assignment to brightness_set
2017-07-23 Phil ElwellBCM270X_DT: Allow multiple instances of w1-gpio overlays
2017-07-23 BabuSubashChandar Add support for Allo Boss DAC add-on board for Raspber...
2017-07-23 Raashid MuhammedAdd support for Allo Piano DAC 2.1 plus add-on board...
2017-07-23 Peter MalkinDriver support for Google voiceHAT soundcard.
2017-07-23 Matt FlaxAudioInjector Octo : Consolidate sample rates and add...
2017-07-23 Matt FlaxAudioinjector addons dts : add reset and regulators...
2017-07-23 Phil ElwellBCM270X_DT: Enable AUX interrupt controller in DT
2017-07-23 Phil Elwellbcm2835-aux: Add aux interrupt controller
2017-07-23 Phil ElwellASoC: Add prompt for ICS43432 codec
2017-07-23 Phil Elwellconfig: Make spidev a loadable module
2017-07-23 Dave Stevensonbcm2835-camera: Correct port_parameter_get return value
2017-07-23 Dave Stevensonbcm2835-gpio-exp: Copy/paste error adding base twice
2017-07-23 Phil ElwellBCM270X_DT: Add lm75 to i2c-sensor overlay
2017-07-23 Dave StevensonBCM270X_DT: Invert Pi3 power LED to match fw change
2017-07-23 K. Y. SrinivasanDrivers: hv: vmbus: Fix a rescind handling bug
2017-07-23 popcornmixconfig: Add RTL8XXXU wifi module
2017-07-23 John GrebMatch dwc2 device-tree fifo sizes to the hardware values.
2017-07-23 Khem Rajbuild/arm64: Add rules for .dtbo files for dts overlays
2017-07-23 Dave Stevensonbcm2835-v4l2: Fix buffer overflow problem
2017-07-23 Matt FlaxASoC: bcm2835_i2s.c: relax the ch2 register setting...
2017-07-23 Matt FlaxAdd support for the AudioInjector.net Octo sound card
2017-07-23 Eric Anholtpanel-raspberrypi-touchscreen: Round up clk rate to...
2017-07-23 Michael Zorandrm/vc4: Don't wait for vblank when updating the cursor
2017-07-23 Phil Elwellconfig: Add CONFIG_CRYPTO_LZ4
2017-07-23 Phil Elwellclk-bcm2835: Read max core clock from firmware
2017-07-23 Phil ElwellBCM270X_DT: Add bcm2708-rpi-0-w.dts
2017-07-23 Dave Stevensonbcm2835-gpio-exp: Driver for GPIO expander via mailbox...
2017-07-23 Dave StevensonBCM2835-V4L2: Correctly denote key frames in encoded...
next